Family-owned · Free estimates

New furnace questions, answered before you get a quote

The short answer

FortHouse Heating & Cooling, a family-owned company based in Plainfield, gives free in-home estimates for new furnaces across Chicago's western suburbs. A new furnace runs $5,000–$9,000 installed, most go in the day after you approve the written quote, depending on availability, and every install carries a 10-year parts and 1-year labor warranty.

17 questionsJump to one

Before the estimate

Is the furnace estimate free, and what happens at the visit?

Yes. FortHouse Heating & Cooling's furnace replacement estimates are free, done in your home, and end with a written price.

At the visit we look at the furnace, its venting and the existing ductwork, and run a Manual J load calculation so the new furnace is sized for your house, not copied from the old one. Then you get a written quote listing the furnace, its efficiency (AFUE), the venting, any duct changes and the installed price.

Repairs work differently: a repair visit starts with a $119 regular-hours diagnostic, and the repair is priced in writing after that.

How many quotes should I get for a new furnace?

At least two written quotes, each from a contractor who has been inside your house and looked at the furnace, venting and ducts.

Illinois's consumer protection guidance recommends written estimates from more than one contractor. Ask each one to price the same efficiency tier, so you're comparing the same job rather than an 80% furnace against a 95% one. A price given over the phone, before anyone has seen the house, is a guess.

What should a written furnace quote include?

A complete furnace quote names the exact furnace and its AFUE rating, and puts the sizing, venting, permit, removal, thermostat, startup and warranty in writing.

Written quoteFortHouse

  • Furnace model and efficiency, 80% or 95%+ AFUE
  • Manual J load calculation, showing how the size was chosen
  • Venting, including new PVC venting for a 95%+ furnace
  • Ductwork check, with any changes priced separately (from $550)
  • Permit and inspection, where your town requires one
  • Removal and haul-away of the old furnace
  • Thermostat
  • Startup and combustion analysis
  • Warranty, parts and labor
  • Installed price

In your hands before the old furnace comes out.

Every line on that list is on a FortHouse Heating & Cooling quote. If a line is missing from a quote you're comparing, ask whether it's included or billed later.

What does a cheap furnace quote usually leave out?

A cheap furnace quote usually leaves out the parts of the job you can't see on the price line: proper sizing, the right venting, the permit and the haul-away.

A quote far below the others often copies the old furnace's size instead of running a load calculation, reuses venting a 95% furnace can't use, skips a permit the town requires, or adds removal and the thermostat later. Ask each contractor what the price includes, line by line.

FortHouse Heating & Cooling includes the permit where it's required, haul-away of the old furnace and a thermostat in the installed price.

Price and paying

How much does a new furnace cost in Plainfield, Naperville or Aurora?

A new furnace from FortHouse Heating & Cooling in Plainfield, Naperville or Aurora costs $5,000–$9,000 installed: $5,000–$7,000 for an 80% AFUE furnace and $5,500–$9,000 for a 95%+ high-efficiency furnace with new PVC venting.

Duct changes, when the existing ducts can't carry the new furnace's airflow, start at $550. Replacing the furnace and central AC together runs $10,000–$17,000. These are planning ranges across the whole service area; the written quote after your estimate visit is the real number for your house.

Is a 95% furnace worth it over an 80% furnace?

A 95% furnace is usually worth it over an 80% furnace if you plan to stay in the house more than five years and your winter gas bills already run high.

A 95%+ furnace needs sealed PVC intake and exhaust venting instead of a metal flue, and that venting is most of the difference between the $5,000–$7,000 and $5,500–$9,000 ranges. A lot of homes in the western suburbs were built with a metal flue for an 80% furnace, so we check the venting route and the ducts before recommending one.

Are there rebates or tax credits for a new furnace?

The federal 25C tax credit ended for equipment installed after December 31, 2025, so it doesn't apply to a 2026 furnace. Utility rebates can still apply, and FortHouse Heating & Cooling helps you fill out the paperwork.

Rebate programs change their terms and amounts, so we confirm the current rebate for the exact model on your quote instead of promising a number up front.

Can I finance a new furnace?

Yes. FortHouse Heating & Cooling offers flexible financing on furnace replacement.

Before you sign any financing, ask whether the offer is true 0% interest or deferred interest. They're advertised the same way but cost very differently if a balance is left when the promotion ends.

Choosing the furnace

Which furnace brand should I buy?

There's no single best brand. FortHouse Heating & Cooling installs all major brands, including Trane, Lennox, Carrier and Amana, and recommends the one that fits your house and budget.

We buy through several local supply houses, which gives us access to many brands instead of steering every house toward one. Within the same efficiency tier, the installation decides more about how the furnace performs than the name on the cabinet.

Does the installer matter more than the brand?

Yes. A correctly sized furnace installed by a careful crew will outperform a premium brand that's oversized, poorly vented or never checked at startup.

Sizing, venting, airflow and the startup readings are all the installer's work, and they decide how evenly, quietly and efficiently the furnace runs. Ask who will actually do the install, and whether they measure combustion before they leave.

How do you size a new furnace?

FortHouse Heating & Cooling sizes a new furnace with a Manual J load calculation, not by copying the old furnace's size.

Manual J works out how much heat your house actually loses, from its size, insulation, windows and layout. An oversized furnace short-cycles: it heats in quick bursts, wears faster and leaves rooms uneven. We also check the existing ductwork, because a furnace can only deliver as much air as the ducts can carry.

Should I repair or replace my furnace?

Repair is usually right when the fix is in the $150–$600 range and the furnace is under 15 years old. Replace it when the repair costs more than half of a new furnace, or the furnace's age times the repair cost tops $5,000.

A common no-heat repair like a new ignitor is typically $200–$400. Repairs are priced in writing after the $119 regular-hours diagnostic, and the repair price is on top of it. A cracked heat exchanger means replacement.

Install day and after

My furnace just died. How fast can a new one go in?

Usually the next day. FortHouse Heating & Cooling installs most replacement furnaces the day after you approve the written quote, depending on availability.

Call (630) 318-6246; the phone is answered 24/7. We come out for the estimate first, and if a repair can safely get you through, we tell you that before quoting a new furnace.

How long does furnace installation take?

Furnace installation takes one day for a standard swap. Moving to a 95%+ furnace that needs new PVC venting, or changing ductwork, can add a half to a full day.

Do I need a permit to replace a furnace?

It depends on the town. Naperville and Plainfield don't require one for a like-for-like swap; Aurora, Joliet and most other cities and villages do.

  • Naperville: no permit for an in-kind furnace replacement, on either the DuPage or Will County side.
  • Plainfield: no permit inside Village limits. Unincorporated addresses with a Plainfield mailing address need a Will County permit.
  • Aurora: the City's Division of Building and Permits issues a furnace permit.
  • Joliet: a City HVAC permit is required, pulled by the contractor doing the work.
  • Unincorporated addresses: the permit comes from the county.

Where a permit is required, FortHouse Heating & Cooling files it and schedules the inspection as part of the job.

What warranty comes with a new furnace?

Every FortHouse Heating & Cooling furnace install carries a 10-year parts warranty and a 1-year labor warranty.

When you compare quotes, ask each contractor to put both in writing. A parts warranty on its own doesn't pay for the labor to install the replacement part.

Choosing a company

How do I tell a quality furnace installer from a cheap one?

A quality installer measures before quoting, writes everything down, and checks the new furnace with instruments before leaving.

  • Runs a Manual J load calculation instead of matching the old furnace's size.
  • Tells you when a repair still makes sense, before quoting a replacement.
  • Puts the furnace model, AFUE, venting, permit and price in writing.
  • Files the permit where your town requires one.
  • Runs a combustion analysis at startup.
  • Has EPA 608 and NATE-certified technicians, and carries insurance, bonding and workers' comp.

Illinois has no statewide HVAC license, so certifications and insurance are the credentials to ask about.

FortHouse Heating & Cooling is family-owned and based in Plainfield. As private-equity firms bought up local HVAC companies, we hired installers and technicians who treat the work as a craft.

Where does FortHouse Heating & Cooling install new furnaces?

FortHouse Heating & Cooling installs new furnaces across Chicago's western suburbs, from its base in Plainfield. Towns marked with an arrow have their own furnace page covering local permits and housing.

Sources

Prices are FortHouse Heating & Cooling's own published installed ranges, last updated November 17, 2026. Your written quote follows a home visit, not a phone call.

Get your free furnace estimate

After hours? Call (630) 318-6246, answered 24/7.

By submitting, you agree that FortHouse may contact you about this request. See our privacy policy.